The gap between fire safety engineering and firefighting operations creates a profound challenge that affects building safety worldwide. Even experienced fire safety engineers - myself included - face uncertainty when designing for firefighters without being firefighters themselves. Yet many building codes explicitly require engineers to account for firefighting operations in their designs.

This examination dives into the timeline analysis essential for effective firefighter support, from notification (when firefighters learn about the fire) to arrival at the building to actual intervention. Each phase contains complexities often overlooked: fire alarm systems might be delayed by human verification, architectural complexity can significantly slow down firefighters reaching the fire, and building conditions upon arrival dramatically affect intervention capabilities.

The assessment of design fires represents one of the most challenging aspects of this engineering work. At what fire size will firefighters begin their intervention? The fire might be growing, steady-state, limited by compartmentation, or controlled by active systems. This crucial but uncertain consideration fundamentally shapes how we design for firefighter safety.

Through computational fluid dynamics modelling, we can evaluate the building conditions firefighters will face. Rather than using simple pass/fail criteria, experienced engineers look for smoke layer behaviour and clear access paths. The gold standard is providing smoke-free routes from the building entry to the fire vicinity. When this isn't possible, we must carefully evaluate the conditions through which firefighters must navigate.

Fire safety systems - from sprinklers to smoke control, information displays to architectural layouts - all dramatically influence firefighter effectiveness. Yet perhaps the most important principle is creating systems firefighters trust. Overly complex designs may be disabled by firefighters who don't understand them or don't trust them with their lives.

The most effective approach combines rigorous engineering analysis with direct input from firefighters themselves. By understanding their actual needs, which might surprise you - we can design buildings that truly support those willing to risk everything to save others. What would your building design look like if you asked firefighters what they really need?

Listen to the entire episode with Szymon Kokot here: https://www.firescienceshow.com/051-fire-science-in-eyes-of-a-firefighter-with-szymon-kokot/

Want to know what happens in the building after a fire alarm? Find out here: https://www.firescienceshow.com/136-fire-fundamentals-pt-6-the-fire-automation-in-a-building/

----
The Fire Science Show is produced by the Fire Science Media in collaboration with OFR Consultants. Thank you to the podcast sponsor for their continuous support towards our mission.

What happens when a lifetime of studying industrial fire hazards meets the creative mind of a novelist? In this conversation with Professor Joaquim Casal, we explore the unique intersection of fire safety engineering and science fiction through his novel "The Last Fire."

Professor Casal, a retired academic from Universitat Politécnica Catalunya and founder of their fire research group, has crafted something unique – a novel where the protagonists are fire researchers and the plot revolves around fire phenomena, fire research and fire testing.

Beyond the novel on its own, our discussion also takes us deep into the world of industrial fire hazards, exploring phenomena that many building-focused fire engineers rarely encounter. From the extreme temperatures of jet fires that can trigger catastrophic "domino effects" in industrial facilities to the deadly "boil-over" phenomenon that has claimed numerous firefighters' lives. We examine the behaviours of jet-fires, pool fires, flash fires, and the spectacular but devastating fireballs created by BLEVEs (Boiling Liquid Expanding Vapor Explosions).

And finally, I think the greatest imminent value of this novel is in the communication - it is a brilliant example of how you can communicate difficult technical concepts of fire to lay people. I believe many fire engineers could be inspired by this example.

If you would like to read the novel, it is available at Amazon:

https://www.amazon.co.uk/Last-Fire-Joaquim-Casal-ebook/dp/B0F4QYLYSV

----
The Fire Science Show is produced by the Fire Science Media in collaboration with OFR Consultants. Thank you to the podcast sponsor for their continuous support towards our mission.

Episode 200! And for this special episode, I've travelled to London to interview Prof. Guillermo Rein and Dr Matt Bonner on a piece of research carried out at Imperial College London, with the experiments performed in our laboratory at the ITB.

In this episode, we discuss the concept of flammability of the building facades and how this flammability is assessed with different testing methods available in the world. You could argue that every country has their own method, and in some cases, they use those methods even with varying criteria of acceptance. Even though the methods are as different as they can be, they all claim they test for fire safety of the external façade and are used as the basis for local regulatory regimes. Knowing that so many methods exist, we approached this with a question: Will they agree on ranking different facades? Will they show us the same results, or will each show us something else? And this question is inspired by Prof. Howard Emmons, who in 1968 went into a similar endeavour with building materials. Back then, Emmons said:

“Such profound disagreement between serious attempts to measure combustibility points out better than any argument that we really don’t know what we are talking about when we say, ‘this is more combustible than that’; ‘this is a more safe building material than that’”.

In this podcast episode, we discuss a series of 25 experiments: testing five facades, two ETICS and three rainscreen facades with a varying degree of use of combustible materials. All the material combinations were built by us in the same way, and then assessed using five test standards:

• The Polish method PN-B-02867,
• The international screening method ISO 13785-1 (smaller corner configuration),
• The German method DIN 4102-20,
• The American method NFPA 285, also used globally
• and the British BS 8414, also highly influential over the world and the basis for the new harmonised EU approach.

We go into the background and rationale of the experiments, an overview of the testing methods as well as into qualitative and quantitative findings of the study.

Once the paper is published, I will update the shownotes with a link here :)

For now, you may also want to revisit previous episodes of Fire Science Show discussing the fire safety of facades –

• It all started with episode 4 with Matt Bonner: https://www.firescienceshow.com/004-facade-fires-and-ai-with-matt-bonner/
• An overview of current Issues with Eleni Asimakopoulou: https://www.firescienceshow.com/124-advancements-in-fire-safety-of-facades-with-eleni-asimakopoulou/
• And some interesting facts about SBI method with Rudolf van Mierlo (and their development of façade testing method): https://www.firescienceshow.com/140-development-and-implementation-of-the-sbi-test-with-rudolf-van-mierlo/

This research was funded by The Berkeley Group. The experimental part was performed at the Building Research Institute ITB, with a group of tests with the Polish method performed as part of our statutory research NZP-130.

Thank you for being with the Fire Science Show for 200 episodes! Huge shoutout to the OFR for enabling this project and allowing me to share insights like this with all of you in an open-access repository!!!

----
The Fire Science Show is produced by the Fire Science Media in collaboration with OFR Consultants. Thank you to the podcast sponsor for their continuous support towards our mission.